Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 22 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How long does it take the police car to catch up? Find t.
vcar = 22 m/sapolice = 3 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 12 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 12 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 4.5 m/s and comes to rest after 2.6 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 4.5 m/sd = 2.6 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 7 kgm2 = 5.5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 30° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 18 m/sθ = 30°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 12 m/sθ = 45°h = 55 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A toy launcher has a vertical spring of stiffness 500 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 6 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.
m = 0.05 kgk = 500 N/mx = 6 cmg = 9.81 m/s²
h = m
8.Work & energyHard
A 4 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.1) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 4 kgh = 2.5 mL = 2.5 mμ = 0.1k = 4000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 5 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 5 kgm2 = 4.5 kgv1 = 10 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 3 kg block hanging from light strings 1.4 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 3 kgL = 1.4 mθ = 10°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 1.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
A pitot-static tube in a wind tunnel reads a difference of 50 Pa between the stagnation pressure and the static pressure. The air density is 1.2 kg/m³. Find the air speed v.
p0 − p = 50 Paρ = 1.2 kg/m³
v = m/s
14.Continuity & BernoulliHard
A horizontal venturi meter (inlet 150 mm, throat 75 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 80 mm. The discharge coefficient is 0.98. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².
A heat engine works between a hot reservoir at 475 °C and a cold reservoir at 10 °C. Find the highest possible thermal efficiency ηmax.
TH = 475 °CTL = 10 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat pump delivers 4.5 kW of heat to a heating system at 20 °C, taking heat from a source at 10 °C. Its actual COP is 45% of the Carnot COP between these temperatures. Find the electrical power Ẇ it uses.
TH = 20 °CTL = 10 °CηII = 45%Q̇H = 4.5 kW
Ẇ = kW
19.Waves, sound & opticsMedium
A pipe open at both ends is 0.75 m long. The speed of sound is 343 m/s. Find the frequency f1 of its fundamental (first harmonic).
v = 343 m/sn = 1L = 0.75 m
f1 = Hz
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.52 and a cladding with n₂ = 1.47. Find the largest angle θa to the fibre axis at which light from air can enter the end of the fibre and still be guided by total internal reflection.
n1 = 1.52n2 = 1.47n0 = 1.00
θa = °
3Solutions
1.Kinematics
Answer: t = 14.67 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·22/3 = 14.67 s
Answer
t = 14.67 s
At that moment the police car moves at 2v = 44 m/s.
2.Kinematics
Answer: t = 4.161 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−35 = 12·t − ½·9.81·t²
4.905·t² − 12·t − 35 = 0
Solve the quadratic
Only the positive root is physical.
t = (12 + √(12² + 2·9.81·35))/9.81 = 4.161 s
Answer
t = 4.161 s
3.Newton’s laws
Answer: μ = 0.397
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 4.5²/(2·2.6) = 3.894 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 3.894/9.81 = 0.397
Answer
μ = 0.397
4.Newton’s laws
Answer: a = 3.767 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 30° = 15.59 m/s
vy = v0·sin θ = 18·sin 30° = 9 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·9/9.81 = 1.835 s
Answer
t = 1.835 s
6.Projectile motion
Answer: x = 36.69 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 12·cos 45° = 8.485 m/s
vy = v0·sin θ = 12·sin 45° = 8.485 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 55 + 8.485·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.485 + √(72 + 1079))/9.81 = 4.323 s
Horizontal distance
x = vx·t = 8.485·4.323 = 36.69 m
Answer
x = 36.69 m
7.Work & energy
Answer: h = 1.835 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 6 cm = 0.06 m
½kx² = ½·500·0.06² = 0.9 J
Height
m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 0.9/0.4905 = 1.835 m
Answer
h = 1.835 m
8.Work & energy
Answer: x = 21.01 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 39.24·(2.5 − 0.1·2.5) = 88.29 J
Maximum compression
½kx² = 88.29 → x = √(2·88.29/4000) = 0.2101 m = 21.01 cm
Answer
x = 21.01 cm
9.Momentum & collisions
Answer: v′2 = 10.53 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (5 − 4.5)/(5 + 4.5)·10 = 0.5263 m/s
v′2 = 2·5/(5 + 4.5)·10 = 10.53 m/s
Answer
v′2 = 10.53 m/s
10.Momentum & collisions
Answer: v = 388.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.4·(1 − cos 10°) = 0.02127 m
Speed after impact
V = √(2·9.81·0.02127) = 0.646 m/s
Collision
v = (m + M)·V/m = 3.005·0.646/0.005 = 388.2 m/s
Answer
v = 388.2 m/s
11.Hydrostatic force
Answer: F = 82.77 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 2.5/2 = 2.25 m
A = H·b = 2.5·1.5 = 3.75 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.25·3.75 = 82.77 kN
Answer
F = 82.77 kN
12.Hydrostatic force
Answer: ycp = 2.939 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2.5/2 = 2.75 m
A = H·b = 2.5·2 = 5 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·2.75·5 = 170 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli to the stagnation point
The flow comes to rest at the tip, so its kinetic energy shows up as extra pressure.
p0 − p = ½ρv²
v = √(2·50/1.2) = 9.129 m/s
Answer
v = 9.129 m/s
14.Continuity & Bernoulli
Answer: Q = 19.89 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Pressure difference from the manometer
Δp = (13600 − 1000)·9.81·0.08 = 9888 Pa
Throat velocity
Continuity and Bernoulli together give the ideal throat velocity.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 298.1 K, T2 = 483.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 10·(100/450)·(483.1/298.1) = 3.601 L
Answer
V2 = 3.601 L
17.Heat engines & refrigerators
Answer: ηmax = 62.15 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 475 + 273.15 = 748.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/748.1 = 62.15 %
Answer
ηmax = 62.15 %
18.Heat engines & refrigerators
Answer: Ẇ = 0.3411 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 20 + 273.15 = 293.1 K
TL = 10 + 273.15 = 283.1 K
Carnot and actual COP
COPmax = 293.1/(293.1 − 283.1) = 29.31
COP = 0.45·29.31 = 13.19
Power input
Ẇ = Q̇H/COP = 4.5/13.19 = 0.3411 kW
Answer
Ẇ = 0.3411 kW
19.Waves, sound & optics
Answer: f1 = 228.7 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·0.75/1 = 1.5 m
Frequency
f = v/λ = 343/1.5 = 228.7 Hz
Answer
f1 = 228.7 Hz
20.Waves, sound & optics
Answer: θa = 22.75 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.