Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
The bag weights are normally distributed with mean 250 g and standard deviation 5 g. What fraction lies between 248.5 and 259.25 g? Give P as a decimal.
The mass X of a product from line 1 and Y from line 2 are independent and normal: X has mean 500 g and standard deviation 8 g, Y has mean 490 g and standard deviation 6 g. Find the probability P that X is greater than Y. Round z to two decimals.
A sample of 6 items has mean 67.5 and standard deviation s = 12. The population is roughly normal. Find the upper limit of the 99% confidence interval for the mean.
The population standard deviation is 14. How large a sample n do you need so that a 90% confidence interval for the mean has a margin of error of at most 2?
Two teaching methods are compared. Group 1: 20 students, mean score 102.5, standard deviation 8. Group 2: 6 students, mean score 93.2, standard deviation 9.5. Assume equal population variances and use the pooled two-sample t test. Find the test statistic t for H₀: μ₁ = μ₂, taking the difference as x̄₁ − x̄₂ (group 1 minus group 2).
A one-sided z test of H₀: μ = 100 against H₁: μ > 100 is done at α = 0.01 with a sample of 64; the standard deviation is known to be 16. In reality the mean is 105.4. Find the probability of a Type II error β in percent.
The table gives 5 paired observations of x = hours studied and y = exam score. Their sums are given. Find Pearson's correlation coefficient r from these sums.
The table gives 5 paired observations of x = load in kN and y = extension in mm. Use the least-squares line ŷ = a + b·x. Predict ŷ for x = 5.
The contingency table shows observed counts. Compute the chi-square statistic χ² for the test of independence between the row and column variables. Do not use a continuity correction.
A chi-square goodness-of-fit test checks whether counts in 8 categories follow a Poisson distribution whose mean is estimated from the same data. Using the table, find the critical value χ²crit at significance level α = 0.01.
Answer: P = 0.5858
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
Answer: P = 0.8413
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Answer: upper limit = 87.25
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Answer: n = 133
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
A sample size is a whole number, and rounding down would make the margin too large.
Answer: t = 2.397
Hypothesis test: the test statistic = (estimate − value under H₀)/(standard error under H₀). The p-value is the probability, assuming H₀ is true, of a statistic at least as extreme as the one observed: the area in one tail for a one-sided H₁, twice the tail area for a two-sided H₁. Reject H₀ when p ≤ α.
With df = 24, the two-sided 5% critical value is 2.064; |t| is larger, so H₀ is rejected.
Answer: β = 35.42 %
Power of a test: power = 1 − β is the probability of rejecting H₀ when it is false. Find the cutoff x̄c from μ₀ and z_α, then compute the probability of landing beyond x̄c using the true mean: z = (x̄c − μ)/(σ/√n).
Answer: r = 0.9757
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: ŷ = 21.85
Least-squares regression: with x̄ and ȳ the means, Sxx = Σ(x − x̄)², Syy = Σ(y − ȳ)² and Sxy = Σ(x − x̄)(y − ȳ), the line ŷ = a + b·x has slope b = Sxy/Sxx and intercept a = ȳ − b·x̄, so it always passes through (x̄, ȳ). Pearson's correlation coefficient r = Sxy/√(Sxx·Syy) lies between −1 and 1; r² is the fraction of the variation in y explained by the line.
Answer: χ² = 3.733
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
df = 2. At α = 0.05 the critical value is 5.991, so H₀ (independence) is not rejected.
Answer: χ²crit = 16.81
Chi-square tests: compare observed counts O with the counts E expected under H₀ using χ² = Σ(O − E)²/E. Goodness of fit: E = n·p for each category, df = k − 1 (minus one more for each parameter estimated from the data). Independence in an r × c table: E = row total × column total / grand total, df = (r − 1)(c − 1). Reject H₀ when χ² exceeds the critical value for the chosen α.
Reject H₀ if the computed χ² is larger than this value.
ExamProblems · examproblems.com/courses/statistics-2-inference