A newborn is pale, has a heart rate of 170/min and weak pulses after a difficult vacuum birth. The scalp is boggy and swelling across the sutures is increasing. What should the nurse suspect?
ASubgaleal haemorrhage
BSimple cephalhaematoma
CCaput succedaneum
DNormal moulding
3.การคำนวณขนาดยาปานกลาง
ต้องการขนาดยา 400 mg จากสารละลาย 10% (w/v) ปริมาตรเท่าใด V จึงมียาขนาดนี้
400 mg10% w/v
V = mL
4.การคำนวณขนาดยายาก
ผู้ป่วยหนัก 81.4 lb คำสั่งใช้ยาคือ 0.5 mg/kg เป็นขนาดยาครั้งเดียว และสารละลายตั้งต้นมีตัวยา 10 mg ใน 1 mL โดยใช้ 1 kg = 2.2 lb ต้องให้ปริมาตรเท่าใด V ปัดเป็นทศนิยมหนึ่งตำแหน่ง
81.4 lb0.5 mg/kg10 mg/1 mL1 kg = 2.2 lb
V = mL
5.อัตราการให้สารน้ำทางหลอดเลือดดำปานกลาง
สั่งให้ 1500 mL ภายใน 6 ชั่วโมง หลังจาก 4 ชั่วโมง คุณพบว่ายังเหลือ 530 mL ในถุง และการให้ยังต้องเสร็จตามเวลา ต้องตั้งปั๊มใหม่ที่อัตราเท่าใด R ใน mL/h
1500 mL / 6 hหลัง 4 h: 530 mL
R = mL/h
6.อัตราการให้สารน้ำทางหลอดเลือดดำยาก
ถุงสารน้ำมียา 250 mg ใน 50 mL และให้ด้วยอัตรา 8 mL/h ผู้ป่วยได้รับยากี่มิลลิกรัมต่อชั่วโมง D
A subgaleal haemorrhage is bleeding under the scalp aponeurosis. It crosses suture lines, can grow rapidly and can cause hypovolaemic shock. It is an emergency, unlike caput or cephalhaematoma.
คำตอบ
A · Subgaleal haemorrhage
3.การคำนวณขนาดยา
คำตอบ: V = 4 mL
Solution strengths: a percentage strength is grams per 100 mL, so 1% = 1 g/100 mL = 10 mg/mL. A ratio strength 1:1000 means 1 g in 1000 mL = 1 mg/mL; 1:10 000 is 0.1 mg/mL. For a dilution the amount of drug stays the same: C₁·V₁ = C₂·V₂.
ความเข้มข้น
10% = 100 mg/mL
ปริมาตร
V = 400/100 = 4 mL
คำตอบ
V = 4 mL
4.การคำนวณขนาดยา
คำตอบ: V = 1.9 mL
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
น้ำหนักเป็น kg
81.4/2.2 = 37 kg
ขนาดยา
0.5·37 = 18.5 mg
ปริมาตร
V = (18.5/10)·1 = 1.85 ≈ 1.9 mL
คำตอบ
V = 1.9 mL
5.อัตราการให้สารน้ำทางหลอดเลือดดำ
คำตอบ: R = 265 mL/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.