Which substance in amniotic fluid is used to judge fetal lung maturity?
AAlpha-fetoprotein, assessed by its level
BSurfactant, assessed by the lecithin/sphingomyelin (L/S) ratio
CGlucose, assessed by its concentration
DBilirubin, assessed by its colour
2.การพยาบาลมารดาและสูติศาสตร์ยาก
A labouring woman has had an epidural for 3 hours. The fundus is displaced and a bulge is seen above the pubic bone. What should the nurse do?
AStart an oxytocin infusion
BCheck for bladder distension and empty the bladder
CIncrease the rate of the epidural
DPrepare her for an emergency caesarean
3.การคำนวณขนาดยาปานกลาง
ผู้ป่วยหนัก 80 kg และได้รับการสั่งยา 5 mg/kg เป็นขนาดเดียว หาขนาดยา D ใน mg
80 kg5 mg/kg
D = mg
4.การคำนวณขนาดยายาก
ขนาดยาที่สั่งคือ 0.6 mg แอมพูลมี 4000 ไมโครกรัมต่อ mL ดูดยาตามขนาดในกระบอกฉีดยา 1 mL: คุณให้ปริมาตร V เท่าใด
0.6 mg4000 mcg/mL
V = mL
5.อัตราการให้สารน้ำทางหลอดเลือดดำปานกลาง
ให้สารน้ำ 1000 mL ภายใน 10 ชั่วโมง ด้วยชุดให้สารน้ำ 10 gtt/mL หาอัตราการหยด R ในหน่วยหยดต่อนาที ปัดเป็นจำนวนเต็มที่ใกล้ที่สุด
1000 mL10 h10 gtt/mL
R = gtt/min
6.อัตราการให้สารน้ำทางหลอดเลือดดำยาก
ถุงสารน้ำมียา 250 mg ใน 250 mL และให้ด้วยอัตรา 12 mL/h ผู้ป่วยได้รับยากี่มิลลิกรัมต่อชั่วโมง D
250 mg/250 mL12 mL/h
D = mg/h
3สารละลาย
1.การพยาบาลมารดาและสูติศาสตร์
คำตอบ: B · Surfactant, assessed by the lecithin/sphingomyelin (L/S) ratio
เหตุผลที่เป็นคำตอบนี้
Surfactant reduces surface tension and keeps alveoli open. An L/S ratio of about 2:1 or more suggests the lungs are mature. Amniotic fluid testing for lung maturity is now rarely used in practice.
คำตอบ
B · Surfactant, assessed by the lecithin/sphingomyelin (L/S) ratio
2.การพยาบาลมารดาและสูติศาสตร์
คำตอบ: B · Check for bladder distension and empty the bladder
เหตุผลที่เป็นคำตอบนี้
Epidurals block bladder sensation, so the bladder can overfill. A full bladder can slow descent of the fetus and cause injury. The nurse should encourage voiding or catheterise per protocol.
คำตอบ
B · Check for bladder distension and empty the bladder
3.การคำนวณขนาดยา
คำตอบ: D = 400 mg
การคำนวณขนาดยา: ปริมาณที่ต้องให้เท่ากับสิ่งที่สั่งหารด้วยสิ่งที่มี คูณด้วยปริมาณที่บรรจุมา: ปริมาณ = (ขนาดยาที่ต้องการ/ความแรงของสต็อก) × ปริมาตรสต็อก ใช้หน่วยให้ตรงกันเสมอ (แปลง g เป็น mg และ mg เป็น mcg ก่อน) และตรวจสอบว่าคำตอบสมเหตุสมผล