1.Easy
What is a network interface card (NIC)?
- AA cable that links two routers
- BSoftware that resolves domain names
- CHardware that connects a computer to a network
- DA server that stores web pages
2.Easy
Which type of network covers a large geographic area, such as a whole country?
- AA local area network (LAN)
- BA virtual LAN (VLAN)
- CA personal area network (PAN)
- DA wide area network (WAN)
3.Easy
Which IEEE standard family defines wired Ethernet?
- AIEEE 802.5
- BIEEE 802.3
- CIEEE 802.16
- DIEEE 802.11
4.Medium
What is the purpose of the TCP three-way handshake?
- ATo encrypt the data
- BTo close a connection quickly
- CTo find the IP address of a host before data can be sent to it
- DTo establish a connection and synchronise sequence numbers
5.Medium
Which metric does RIP use to choose routes?
- AHop count
- BBusiness policy
- CLink bandwidth
- DMeasured delay
6.Medium
Why does a switch sometimes send a frame out of all ports except the one it came in on?
- AThe frame has a wrong IP checksum and must be checked by every host
- BThe switch is acting as a router
- CThe destination MAC address is not yet in its address table
- DThe frame is too large for one port
7.Hard
In the TCP/IP model, which layer adds port numbers?
- AApplication layer
- BTransport layer
- CInternet layer
- DLink layer
8.Hard
A TCP connection has a 64 KB window and a 100 ms round-trip time, and no window scaling. What is its approximate maximum throughput?
- AAbout 0.5 Mbit/s
- BAbout 50 Mbit/s
- CAbout 640 Mbit/s
- DAbout 5 Mbit/s
Answer key
- 1. C · Hardware that connects a computer to a network
- 2. D · A wide area network (WAN)
- 3. B · IEEE 802.3
- 4. D · To establish a connection and synchronise sequence numbers
- 5. A · Hop count
- 6. C · The destination MAC address is not yet in its address table
- 7. B · Transport layer
- 8. D · About 5 Mbit/s
Full step-by-step solutions: practise this topic on examproblems.com.