The op-amp is ideal and runs from ±15 V supplies. Find the current I1 through R₁, flowing towards the op-amp.
Op-amp circuits worksheet with answers
1.Easy
Vin = −0.1 VR1 = 4.7 kΩRf = 47 kΩ
I1 = mA
2.Easy
The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
Vin = 0.3 VR1 = 22 kΩRf = 47 kΩ
Vout = V
3.Medium
The difference amplifier uses an ideal op-amp with ±15 V supplies, with R3 = R1 and R4 = R2. Find the voltage V− at the inverting input.
V1 = −1.9 VV2 = 1.8 VR1 = R3 = 22 kΩR2 = R4 = 2 kΩ
V− = V
4.Medium
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±12 V. The non-inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
R1 = 2 kΩRf = 100 kΩVsat = ±12 V
Vin,max = V
5.Hard
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
V1 = 0.8 VV2 = 1.6 VR1 = 47 kΩR2 = 22 kΩRf = 10 kΩ
Vout = V
6.Hard
The op-amp is ideal and runs from ±15 V supplies. The resistor ratios are not matched. Find the output voltage Vout.
V1 = 1.2 VV2 = 0.4 VR1 = 100 kΩR2 = 100 kΩR3 = 4.7 kΩR4 = 47 kΩ
Vout = V
Answer key
- 1. I1 = −0.02128 mA
- 2. Vout = −0.6409 V
- 3. V− = 0.15 V
- 4. Vin,max = 0.2353 V
- 5. Vout = −0.8975 V
- 6. Vout = −0.4727 V
Full step-by-step solutions: practise this topic on examproblems.com.