The op-amp is ideal and runs from ±15 V supplies. Find the current I1 through R₁, flowing towards the op-amp.
Op-amp circuits worksheet with answers
An inverting amplifier with an ideal op-amp must have a voltage gain of −2.5. The input resistor is R1 = 2.2 kΩ. Find the feedback resistor Rf.
The op-amp is ideal and runs from ±15 V supplies. Find the output voltage Vout.
The op-amp is ideal and runs from ±15 V supplies; its output saturates at ±12 V. The non-inverting amplifier is driven by a sine wave. Find the largest input amplitude Vin,max (peak value) for which the output does not clip.
The summing amplifier uses an ideal op-amp with ±15 V supplies. Find the output voltage Vout.
Two ideal op-amp stages are connected in cascade: an inverting amplifier (R1, Rf1) followed by a non-inverting amplifier (R2 to ground, Rf2 in the feedback). Both run from ±15 V supplies. Find the overall voltage gain Av = Vout/Vin.
Answer key
- 1. I1 = −0.04545 mA
- 2. Rf = 5.5 kΩ
- 3. Vout = −7.7 V
- 4. Vin,max = 1.091 V
- 5. Vout = −0.4497 V
- 6. Av = −9.4
Full step-by-step solutions: practise this topic on examproblems.com.